How do I reset the descale light on my Keurig duo?

In this short article, we will provide an answer to the question “How do I reset the descale light on my Keurig duo?” and the information on handling Keurig duo.

How do I reset the descale light on my Keurig duo?

The descale indicator light may be reset by turning it off by pressing and holding down the 8oz and 10oz buttons simultaneously for three seconds after you’ve finished descaling your brewer.

Unless you’re certain that there are no further obstructions in the needle or anyplace else, you should descale your coffee maker. To accomplish this, use the descaling solution that Keurig supplies. Because of the presence of citric acid in it, it must be treated with the greatest care possible.

What exactly is the function of the Descale Light?

Many coffee makers are equipped with a descale light, and when the descale light illuminates, it indicates that your coffee maker has to be thoroughly cleaned.

The light will illuminate when calcium or dirt particles gather on the machine’s internal parts and cause the machine to get clogged. When this occurs, the machine may be unable to work properly.

It is also possible that using refillable K-cups will cause the descale light to illuminate if you pack your cup too tightly, preventing the water from flowing freely through the appliance. A descaling light may illuminate as a result of this.

How to descale your Keurig brewer?

The following are the steps to descale your Keurig brewer and repair the descale light on your Keurig brewing system.

  • By shutting off your Keurig, you can certain that there is no power going to it.
  • Remove the water filter from the Keurig and place it somewhere safe.
  • Pour the descaling solution into the machine while it is still warm.
  • Insert a cup into the machine and press the start button.
  • Place the combination in a safe place until needed (sink)
  • Set the brewer to brew at the appropriate temperature.
  • Before using the water tank, make sure it is completely clean.
  • You’ve now mastered the art of resetting the descale light on your Keurig coffee maker! But hold just a minute, there’s more. If your Keurig is still displaying the descale message, this warning may still appear.

When I try to turn off the Keurig Duo Descale Light, nothing happens! Why?

Taking care of your machine is a straightforward answer to this problem. Following this step-by-step guide will make cleaning your Keurig Duo a piece of cake. After cleaning your machine and noticing that the light is still on, you may turn it off by pressing the 8oz and 10oz buttons together for 5 seconds until they become inactive.

Should Descale’s efforts be deemed a failure?

The light on your Keurig should turn off when it has been descaled, but it does not. There’s something wrong here. Repeat the procedure with an additional solution to get rid of any excess scale that has accumulated. As an alternative, you can use vinegar to descale your machine and allow it to sit for a few hours to work its magic. If you’re dealing with a tenacious buildup in your equipment, citric acid is an excellent tool to have on hand.

If the Keurig descale light continues to illuminate, it is critical to determine what is causing it to illuminate in the first place. If this happens, it could be due to poor plumbing or a cup that is too large for the machine.

What exactly is the Keurig Exit Needle Cleaner?

A Keurig can descale and fix the descale light at any given time. The Keurig exit needle may need to be cleaned from time to time. The K-cup has a slight bump on it that you can notice if you look closely. A tiny needle punctures the hump at the bottom of your cup, piercing it and causing it to leak.

The needle can become clogged throughout the procedure. An accumulation of ground coffee or other gunk in the machine may prevent you from successfully making any coffee in the future if this occurs.

Insert a sewing needle or a paper clip to release and clean the needle once it has been inserted. Simply said, that’s all there is to it.

When Should I Clean My Keurig? 

When it comes to descaling your Keurig, a decent rule of thumb is once every three months, but that is only the beginning. When using your Keurig frequently, you may find that you need to clean it more frequently; it all depends on how frequently you use your Keurig.

In addition, you must change the water filter every two months and carefully clean it after each use. This will prevent the flavor of your coffee from being compromised.


In this short article, we provided an answer to the question “How do I reset the descale light on my Keurig duo?” and the information on handling Keurig duo.


Leave a Comment